ATEN 4 PORT MasterView Plus KVM Switch: 1U, PS/2 Connectors (CS114A)

The MasterViewprovides three convenient methods to access the PCs connected to the system: using the push button Selection s w i t c h e s located on the unit's right panel; with an optional foot s w i t c h; and entering Hot Key combinations from the keyboard. Setup is fast and easy; plugging cables into their appropriate ports is all that is entailed. There is no software to configure, no installation routines, and no incompatibility problems. Since the MasterView intercepts keyboard input directly, it works on any hardware platform and with all operating systems.

There is no better way to save time and money than with a MasterView installation. By allowing a single console to manage all of the attached PCs, the MasterView eliminates the expense of purchasing a separate keyboard, monitor, and mouse for each system. Additionally, it saves all the extra space they would take up, and eliminates the inconvenience and wasted effort involved in constantly having to move from one PC to the other.

• Cascadable to three levels - Controls up to 64 PCs from a single console
• Master and slave units are now auto detected when daisy chaining - there is no longer any need to set switches
• No Software Required - PC Selection via Front Panel Pushbuttons, Hot Keys
• The connector layout has been redesigned. The video connector positions have been moved so that they are now underneath the keyboard and mouse connectors. This makes for more convenient cable connecting
• K/M reset: holding in the Port1 and Port2 selection switches for three seconds resets the keyboard and mouse
• Auto Scan function: pressing the Port3 and Port4 selection switches at the same time initiates Auto Scan mode
• Microsoft Intellimouse, Logitech FirstMouse+, MouseMan+ and other wheel mice support
• PS/2 and Serial Mouse Emulation provided for system bootup
• Mouse Conversion's PS/2 mouse controls all connected PCs - Even those with serial mice connectors
• Hot Pluggable - Add PCs or Remove Connected PCs for maintenance without powering down the KVM switch
• Superior Video Quality - Up to 1920 x 1440
• Easy PC Selection via Front Panel Pushbuttons or Hot Keys
• Keyboard Status (Caps Lock, Num Lock, Scroll Lock) restored when switching PCs
• LED Display for easy status monitoring
• Uses standard cables

Requirements:                           

• 1 VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any PC in the installation
• 1 PS/2 Style Mouse
• 1 PS/2 Style Keyboard
• 1 VGA, SVGA or Multisync card
• 1 6-pin mini-DIN (PS/2 Style), or DB-9 (standard serial), mouse port
• 1 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or 1 5-pin mini-DIN (AT Style) keyboard port with + 5 DC on pin 5 and Ground on pin 4

Package Content                           

• 1 C S 1 1 4A K V M S w i t c h
• 1 Power Adapter
• 1 User Manual

Function C S 1 1 4 A Computer Connections Daisy Chain or Cascading 64 Direct 4 Console Connectors Keyboard 1x6 pin mini-DIN Female (PS/2) Monitor 1xHDDB15 Female Mouse 1x6 pin mini-DIN Female (PS/2) CPU Connectors Keyboard 4x6 pin mini-DIN Female (PS/2) Monitor 4xHDDB15 male Mouse 4x6 pin mini-DIN Female (PS/2) Dimensions Height 3.3" Length 9" Width 7.2" Emulation Keyboard PS/2, AT Mouse PS/2, Serial Housing Case Metal LEDs On Line 4 Selected 4 Port Selection Push Buttons, Hot Keys, or foot switch Power Amps 300 mA(Max.) Voltage DC 9V Scan Interval 5, 10, 20, 40 seconds Video Resolution 1920x1440; DDC2B