Aten USB KVM EXTENDER W/ CAT5 CABLE (CE700)

The CE700 is a USB (Universal Serial Bus) based KVM Extender that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse).

Because it allows access to a computer system from a remote console, the CE700 is perfect for use in any type of insallation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location - away from the dust and dirt of the factory door, or the harsh environmental influence of a construction site, for example.

The CE700 is also useful for control and security purposes, where you can have the system unit in a secure area at the at the same time that you put the console in the most convenient location for user access.

The CE700 improves on previous designs by: 1) using inexpensive Category 5 cable (the kind commonly used in ethernet networks), instead of bulkier, more expensive, standard cables, for a much neater, more convenient, more reliable data transfer connection; 2) it is able to sense the distance to the system and automatically adjusts the gain accordingly; and 3) it features a custom ASIC to ensure the utmost in reliability and compatibility.

Setup is as easy as can be - simply connect the computer system box and local console to the Local CE700 Module; run the Category 5 cable to the Remote CE700 Module (up to 150 meters away); and plug the remote console into the Remote Module.

Note: You can control numerous remote systems from a single console by combining the CE700 with a USB KVM switch.

• Category 5 Ethernet Cable to Connect the Local Remote Units (Up to 150 meters apart)
• Auto Signal Compensation (ASC)
• USB Keyboard and USB Mouse Ports
• Dual Console Operation - Control your System from both the Local and Remote USB Keyboard, USB Mouse, and Monitor Consoles
• USB Overcurrent Detection and Prevention
• Push Button Selection of the Active Console
• High Resolution Video - Up to 1280 x 1024
• Supports VGA, SVGA, and Multisync Monitors
• Local Monitor supports DDC; DDC2; DDC2B
• Hot Pluggable

• Consoles:
• A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation
• A USB keyboard
• A USB mouse
• Computers:
• A VGA, SVGA or Multisync card
• USB Host Controller and Type A USB Port

• One (1) CE-700L USB Console Extender (Local Unit)
• One (1) CE-700R USB Console Extender (Remote Unit)
• One (1) CS Custom USB KVM Cable
• Two (2) Power Adapters
• One (1) User Manual